Halloween - Servant 3
First, the skin is cleansed with Clean & Care Natural Micellar Water 120 ml and prepared for make-up. This is important before applying prosthetics, as oils and cream residues on the skin surface can impair the stability of the adhesive to be used. The cleansed skin is then rinsed with water.
First, the brows are brushed upward with Pros-Aide - The Original - 50 ml so that they lie as flat as possible. Then, a layer of Translucent Powder 20 g (TL 1) is pressed firmly onto them with a powder puff to remove stickiness. Finally, to conceal and highlight the area, apply TV Paint Stick (TV white) to the brows. Fix with Translucent Powder 20 g (TL 1).
Apply the Digital Complexion Concealer to the entire eyelid up to the brow bone. After curing, draw Supracolor 8 ml (079) and Supracolor 8 ml (080) from the inner to the outer corners of the eyes. Then intensify and fix the shape with the Eye Shadow Matt (SM) and Eye Shadow Matt (SA 131). Repeat this step along the lower lash line before creating even more depth with Eye Shadow Matt (deep black). HD Cream Liner (golden shimmer) is then applied along the lower waterline.
HD Cream Liner (golden shimmer) is applied to the center of the eyelid to create an accent. It also serves as a base. Mix HD Living Color (silver) and HD Living Color (copper) and press the mixture onto the HD Cream Liner (golden shimmer). Now apply a layer of Supreme Volume Mascara (black) to the upper and lower lashes. Apply a random mixture of the smaller Body Jewels (red) to the outer and inner corners of the eyes before outlining them with gold metallic details. Use Pure Pigments Metallic (pure gold) for this, which is mixed with a few drops of Cake Eye Liner Sealer.
Next, create a teardrop using Artex. Pour a 1:1 mixture of components A and B onto a mixing palette before adding small amounts of Pure Pigments Metallic (pure gold) and Pure Pigments Metallic (pure ruby). The mixture is then applied to the eye make-up detail and shaped while the curing process begins.
A layer of Pros-Aide - The Original - 50 ml is applied to the clean skin where the prosthetic is to be attached. Another layer of it is also spread on the back of the prefabricated prosthetic before it comes into contact with the skin.
The prosthetic is pressed firmly onto the skin, leaving the visible edge. Once it is fully adhered to and dry, the next step can take place.
Using a cotton swab dipped in Acetone 100 ml, gently smudge the edges to create a smooth transition between the skin and prosthetic. If there are areas that are undesirably shiny, you can apply a small amount of Perfect Matt over them before applying the color.
The prosthetic is matched to the skin with Body Illustration Make-up Color Set 18 Colors (Extra). Activate the corresponding colors using BIC Activator until they become translucent and apply them using a brush in short, flicking motions. Depth is created by applying a deep red shade from the same palette in the center of the wound.
The skin is perfected with both Digital Complexion Fluid Foundation and Digital Complexion Concealer. For a soft highlight, apply Shimmering Event Foundation (pearl) to the cheekbones, nose, and chin. Then gently blend Supracolor 8 ml (079) & Supracolor 8 ml (080) towards temples and down to cheekbones. The cheekbones are then highlighted with a blend of the loose pigments used previously - Pure Pigments Metallic (pure gold) and HD Living Color (silver). Excess shine is removed with the help of Anti-Shine Powder 25 g (natural).
Now apply Body Jewels (red), a mixture of Polyester Glimmer Red (Polyester Glimmer medium (bright red), Polyester Glimmer medium (bright red), Polyester Glimmer fine (bright red)), and True Nature Glitter (red) to the wound and adhere with Hydro Spirit Gum 50 ml. Fresh Scratch 30 ml (dark) and HD Blood Gel (light arterial) go on the inside of the wound as well as the surrounding area to give a more realistic look. Apply a mixture of Fresh Scratch 30 ml (dark), HD Blood Gel (light arterial), and Drying Blood 50 ml (light) around the nose and mouth.
An additional wound is applied to the body. For this, you can use the same application, dyeing, and decorating methods as in the above steps.